Star Wars Duel - Lithophane and suspended - play of lights by morfaber78

morfaber78

Hobby & DIY>Other Hobby & DIY

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.25mm layer, 2 walls, 20% infill

Designer

3.2 h

1 plate

4.8(15)

0.12mm layer, 2 walls, 100% infill

Designer

6.2 h

1 plate

4.8(9)

0.2mm layer, 2 walls, 100% infill

Designer

9 min

1 plate

5.0(8)

Diorama 0.2mm layer, 2 walls, 15% infill

16.3 h

2 plates

5.0(4)

Click to see more

Boost

310

480

554

296

Released

Description

For Star Wars fans and beyond...

Lithophane with chase scenario between Luke Skywalker and Darth Vader.

THE VISUAL EFFECT IS POSSIBLE EVEN WITHOUT LED OR ADDITIONAL LIGHTS AT THE REAR. as you can see from the photos even by exposing it to the sun.With LEDs, it is more clearly accentuated

the rear lithophane is in Bambulab PLA, the green lasers in transparent TPU, the diorama in Bambulab gray PLA.

simple model for gift or as a collector's item

I created the image with certain plays of light to enhance the lithophane objects.It prints with any FDM, low speed, four perimeters and 100% infll. layer height 0.12

File:

Litho plane
monocrome (litho curve, negative laser, laser , diorama monocrome)
diorama multicolor

It can be printed with PLA with light colors.

If you use the colored ones, you will have different effects.

for lithpohanie, load the file in bambu studio together with the negative laser file. In the object properties, give the laser the negative characteristic (it will be subtracted from the lithophane)

there is no need for any support

X-Wing sospeso dal PLA

due perimetri

altezza strato 0,25

riempimento 15%

senza bordo

nessun supporto

le pareti sottili si attivano

Per la stampa FDM

the lithophane is inserted in the rear part of the diorama

have fun and good prints

Comment & Rating (55)

@RB1105

Boosted

Print Profile

Diorama 0.2mm layer, 2 walls, 15% infill

I scaled it up about 150%, and did a little coloring. I should have paid more attention to the lithophane thickness when scaling because it’s a little thick now, and hard for the light to pass to show image, but that was my mistake. Still looks great just wish I would have caught it beforehand.

@morfaber78

Scaling it to 150%, the thickness of the lithophane becomes important. you should try to make the external edge thick (for fitting with the diorama) and the internal thinner. We would have to create a negative shape and apply it in the slicer. Option two, thin the layer by carving the surface in graphics programs. In any case, nice result

@JasonDVD

honestly i feel like that makes it slightly better, i was thinking of placing it in front off the lighting behind a Tv cabinet which is rather bright. Would you maybe like to upload a remix or so ?

@jordankremer

Print Profile

0.25mm layer, 2 walls, 20% infill

pretty sweet desighn

The designer has replied

@morfaber78

I really like

@Schmoaler

Print Profile

0.25mm layer, 2 walls, 20% infill

Really cool.

The designer has replied

@morfaber78

I like

@Schmoaler

Print Profile

0.2mm layer, 2 walls, 100% infill

Printed in Geetech PLA Green because I have no TPU in this color. Used a layerhight of 0.16 an a Brim. Had a view gaps, where the backlight shines thrugh, but no problem for me. I think TPU is the better choise to close the gaps.

@Kracko1_

beautiful 😍

The designer has replied

@morfaber78

I like

@di_prints

Print Profile

Diorama 0.2mm layer, 2 walls, 15% infill

Awesome design! 👌 Printed it as a gift with Nobufil ABSx Filaments on P1S and the result is cool. Everyone liked it🔥

@Schmoaler

Print Profile

0.12mm layer, 2 walls, 100% infill

Printed in Bambulab PLA Matte for the Lithophane and Geetech PLA Green for the Laser.

@user_3043977719

ok, I have a request first off though great model second do you think you could make a model of a lavaback or of a death stalker from the game wild hearts

The designer has replied

@morfaber78

I'll do some research and see what can be done. Did you have something specific in mind?

@user_3043977719

it’s a lavaback or a death stalker from the game wild hearts

@user_3043977719

thanks a ton, I’ve tried to find a modelist who’d make it but nobody so far has said they can

@afreed00789

Great model, I am just having trouble adding the laser as a negative part. I loaded both files to the project and made the laser a negative part but I cannot change the color and it is not filling in the gap on the print. What am I missing?

The designer has replied

@morfaber78

The NEGATIVE LITHO CURVE file must be loaded together with the LITHO CURVE file. The ownership of the file must be changed to negative. The lithophane is printed with the parts without laser. Finally, the LASER ON BED file must be printed and inserted into the holes

@afreed00789

Replying to @morfaber78 :

That makes sense, I'm an idiot. Thank you!!!!