3D MODEL DESCRIPTION

Recently I visited Prague and I thought it would be a great time for adding a new model to my countryball series.

Let me introduce you Czechiaball! He is a cheerful and social little guy with his essential mug of Czech beer.

As with all of my countryball models this one also can be printed as separate parts on a single color FDM printer, however I recommend to print the beer mug out of clear resin.

3D PRINTING SETTINGS

All parts are designed to be printed without supports and they can be assembled with snap fit and press fit joints. However this means that the tolerances are pretty tight and any elephant foot or stringing could interfere with the connections.

I've tested the models on my Ultimaker 2 and Prusa MK3S printers.

Print all parts in their corresponding color. Most of them at .15 mm layer height, and the smaller ones (clips, beer foam, eyes) at .1 mm.

Assembly: See the attached illustration!
-attach the red and white parts with the larger clips
-connect the blue one to them
-put the beer assembly together. They should press fit. Mind the ORIENTATION of the beer and the mug!
-press the smaller clips into the eye holes and use them to attach the eye contour and eye parts
-drink a glass of Czech beer :)

The author of the model is https://cults3d.com/en/users/DanielJosvai/3d-models
Source : https://cults3d.com/en/3d-model/game/czechiaball