All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..
So, if you like my work you could
buy me a coffee if you like. 😉
https://www.buymeacoffee.com/a.vdh_83
Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4.8
PLA BambuLab Basic Cyan Transmission Distance: 4.8
PLA BambuLab Basic Yellow Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #14 (1.2mm) swap to Cyan
At layer #21 (1.76mm) swap to Yellow for the rest.