Build Plate Holder 3x, 5x, for X1 / P1 series, A1 and A1 mini by 3DTechBase

3DTechBase

3D Printer>3D Printer Accessories

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

V3.2 Single Color, 3 Slot, 0.2mm layer, 2 walls, 18% infill

Designer

3.6 h

1 plate

4.9(37)

V3.2 Multi Color, 3 Slot, 0.2mm layer, 2 walls, 18% infill

Designer

10 h

1 plate

4.7(17)

V3.2 Single Color, 5 Slot, 0.2mm layer, 2 walls, 18% infill

Designer

5.2 h

1 plate

5.0(12)

V3.2 Multi Color, 5 Slot, 0.2mm layer, 2 walls, 18% infill

Designer

11.5 h

1 plate

4.9(14)

Click to see more

Boost

155

309

104

814

346

Released

Description

I wanted to make a stable but beautiful building plate holder that, apart from being practical, can show the advantage of multi-color printing. I looked over the offer and made my own version by combining their advantages. Having refined the first version, the second version has already met my expectations, so I would like to share it with you.

Easily holds up to 3 256x256 plates for the X and P series and A1 printers, the A1 mini version is also available (link)! . The inscription and logo are made in such a way that they are not visible when printing in one color, but can be easily handled in Bambu Studio when printing in multiple colors.

Try it and please let me know what you think! I hope you like it.

If you like what I do, please support my work by sharing and downloading! Thank you!

Compatible:
X1 series
P1 series
A1

If you are looking for a plate holder for the A1 mini (3 slot and 5 slot version), you can find it at the link here.

The matching poop holder is also available in three sizes! Link

and Build Plate Guide

Build Plate Holder Printing:
I used ABS material for the prototypes, but you can also use PLA material.

Layer 0.2, 2 walls, 18% sparse infill density, adaptive cube, infill direction 75°
Support allowed from own material (only used for the legs, see pictures)
Support bottom Z distance 0.2
Support/object XY distance 0.35

Other materials used:
4 x D10 anti-slip disc (optional)

Update 02.06.2024. - V3.1

I modified some roundings and increased the length of the tray space by 1 mm. Although I didn't experience it when printed on another printer, they found that the tray stuck a little in place. I fixed the problem.

Update 02.08.2024. - V3.2

I made it easier to insert the building plates and increased the size of the Bambu Lab logo on the side. I also made the 5 slot versions and single color versions print profile.

Update 02.10.2024. - V3.2 - A1 mini

I also made a version suitable for the A1 mini, thanks again to Sam Bossert for the A1 mini plate dimensions! From there it was easy, apart from the width, the plate holder is completely identical to the holder for the X1 / P1 series and A1.

Update 02.21.2024. - V3.3 - A1 mini 5x

I received a request to make a 5-slot version to A1 mini, so I made it for you. I hope you like it! link in the description.

Comment & Rating (104)

@hrulab

Print Profile

V3.2 Multi Color, 5 Slot, 0.2mm layer, 2 walls, 18% infill

good flow rate is too low and there are useless supports. not perfect, but good enough

The designer has replied

@3DTechBase

Thank you for the feedback!

(Edited)

@3DTechBase

May I ask what you printed from and what do you mean by unnecessary supports? Only under the optional non-slip soles was approx. two layers of support. I want to do my best.

(Edited)

@hrulab

Replying to @3DTechBase :

I've used PETG for this model The layer above the holes can be printed with proper cooling without supports. I haven't tested my A1 fans yet, but I'm sure that's not a big problem for them Anyway those supports are not a big problem (although I almost lost my right eye removing them💀) and you've done great job👌

(Edited)