Ironman Hueforge

I Designed a friction Fit Frame that can be found here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA Overture Red Transmission Distance: 5
PLA Bambu Basic Gold Transmission Distance: 4
PLA Default White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Red
At layer #19 (1.6mm) swap to Gold
At layer #26 (2.16mm) swap to White for the rest.