Here is a Triceratops Treasure Hunter!

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 100x100mm

If you resize the model from 100 x 100 make sure you do NOT scale the Z axis or the print colours will not be in the same position

If you would like to print the frame that I have pictured it is here:

https://makerworld.com/en/models/173529#profileId-190693

The Zebra pictured can be found here:

https://makerworld.com/en/models/168561#profileId-185055

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA Default White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Brown
At layer #19 (1.6mm) swap to Latte Brown
At layer #24 (2mm) swap to White for the rest.