Question Block as pen holder
Copyright Claim
Question Block as pen holder
Boost
112
192
36
Print Profile(2)
Standard question block, 0.2mm layer, 2 walls, 15% infill
Designer
2.1 h
1 plate
Standard question mark, 0.2mm layer, 2 walls, 15% infill
Designer
28 min
1 plate
Boost
112
192
36
1
269
248
Released
Description
Mario Question Block as pen holder
Comment & Rating (36)
All
Print Profile
Standard question block, 0.2mm layer, 2 walls, 15% infill
Great print, the kids love it!
0
Reply
Print Profile
Standard question block, 0.2mm layer, 2 walls, 15% infill
printed great thankyou assembly time
0
Reply
Print Profile
Standard question mark, 0.2mm layer, 2 walls, 15% infill
excellent thanks assembling now
0
Reply
Print Profile
Standard question mark, 0.2mm layer, 2 walls, 15% infill
First I'd like to say thanks for the model its very nice. I notice a few small issues but none worth knocking a star off. I noticed in bambu labs when i sliced it some of the top overhang lines on the question marks were slicing at different levels. I fixed this by changing the first layer to .24mm i believe. It was a minor issue that really wouldnt have affected the print I just like straight lines. Next I wasnt sure about the same overhangs needing support. So I accually did a small test and placed none on one side and diffent amounts on the rest. Long story short all the sides with supports came out perfect while the no support side had one small line druping that was easily fixed. So no supports should be fine but if you add them just add minimal amounts. Lastly, I moved the seams to the one corner; but, honestly I don't think it really matters either. If you made it to here I Hope this helps.
0
Reply
Print Profile
Standard question block, 0.2mm layer, 2 walls, 15% infill
This thing is super fun and it was pretty dang easy to print. I didn’t have a single issue.
0
Reply
Print Profile
Standard question mark, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Standard question block, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Standard question mark, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Standard question block, 0.2mm layer, 2 walls, 15% infill
was a little small at default size, had to scale up a little to make it useable.
0
Reply
Print Profile
Standard question mark, 0.2mm layer, 2 walls, 15% infill
Very clean print!
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld