Honeycomb shower base - 2 models.
I was needed a corner shower base for a liquid soap but I was thinking in something different and that can be always "available" if in the future need replacement. So I did this two desings and print it without need to look on any store and taking advantange of my 3D printer!.
Include 2 models one shorter than another. Can be installed with different method, I used screws with washers for be sure long lasting.
Printed on PETG for better duration on a humidity place. Printed at 100% with 4 walls because my liquid soap is a bit “heavy” and I dont want to fell it down. The result is very rigid and make the job very well. Can be printed with less infill but recommended use at least 3 walls to get better resistance.
Any questions or help, please feel free to contact us.
Follow us on Instagram and youtube for more:
https://www.instagram.com/lrcustoms/?hl=es
https://www.youtube.com/channel/UC3_c6fH_6cQuHi-jA_igON
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.