Set of 3 Fan Art Bookmarks - Monkey D. Luffy Portraits from The Manga and Anime One Piece

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basics White Transmission Distance: 3.5

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #11 (0.96mm) swap to Yellow
    At layer #15 (1.28mm) swap to White for the rest.