The Pioneer plaques are a pair of gold-anodized aluminum plaques that were placed on board the 1972 Pioneer 10 and 1973 Pioneer 11 spacecraft, featuring a pictorial message, in case either Pioneer 10 or 11 is intercepted by intelligent extraterrestrial life. The plaques show the nude figures of a human male and female along with several symbols that are designed to provide information about the origin of the spacecraft.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Gold Transmission Distance: 6.8
PLA BambuLab Basic White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #11 (0.96mm) swap to Gold
At layer #19 (1.6mm) swap to White for the rest.