The model is also designed for printing on small Bambulab A1 mini printers.
The individual parts need to be glued together (the parts contain centering points for easier assembly).
I recommend printing from PETG material, due to heat resistance. The Solid variant can be printed from PLA.
If necessary, the scale can be adjusted.
You can hang the model on nails or stick it with double-sided adhesive tape.
The length of the led strip is 124 cm
The cable can be routed through the center or at the edges
The length of the led strip is 48 cm
You can use WS2812B RGB LED Strip Light from Bambu lab store
The model is designed for led strips (max 10mm).
I recommend led strips of warm colors (2000-3000 K) or RGB.
The parts are described from the back.
For the Horizon variant, the 1T diffuser belongs to part 1, etc.