3 in a row

3D Model Description: Box for playing the popular 3 in a row game.

Composed of two pieces (box_3R_ocult.stl and lid_3R_ocult.stl), you will need some pieces of filament to make the hinge axes. You may need to fix them at one end with a drop of glue.

The lock is achieved by inserting two magnets of diameter 6 x 3mm high, which you will need to place in the right direction on each piece.

On the box piece, you will have to make a print pause at the height of 9.6mm to insert the magnet, which you will have to fix with a drop of adhesive.

On the cover part, the pause is also made at the height of 9.6 mm.

The set is completed with the necessary tokens, marked with a circle and a cross to differentiate them. You can also print them in two different colors.

Alternatively, you can use the files box_3D_visible.stl and lid_3D_visibler.stl. The magnet housing is open and there is no need to pause printing, they can be placed and glued after printing is finished. In this case, they will be visible.

3D printing parameters:

Filament: PLA

Layer height: 0,2

Perimeters / Perimeters: 2

Capas sólidad superior / Solid layers top: 5

Capas sólidas inferior / Solid layers bottom: 4

Filling / Infill: 15% - Grid.

Support material / Support matertial: No

Total printing time is approximately 4h 30m.