Millennium Falcon Toy Brick 3:1 Scale Replica by Zer0 Effort Workshop

Zer0 Effort Workshop

Toys & Games>Construction Sets

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill

Designer

8 h

5 plates

4.7(9)

Boost

120

170

169

124

Released

Description

"She might not look like much, but she's got it where it counts, kid."

3D print your own Star Wars Millennium Falcon made from 3:1 scale replica of popular toy bricks.

Printing Guide

It is recommended to use the print profile I have provided to print this model. The print profile is separated by color on each plate. I also recommend printing on a smooth surface PEI plate so your slope and tile parts do not have a textured surface. You can use whatever filament you have on hand, but I used:

Sunlu Gray PLA for the Dark Gray
Bambu Lab Gray PLA for the Light Gray
Paramount 3D PLA Skin - Dark Complexion for the Dark Tan
Sunlu Glow in the Dark Blue PLA for the Trans Blue (https://www.amazon.com/gp/product/B0C4LSVW6N/)
Hatchbox Transparent Black PLA for the Trans Black (https://www.amazon.com/gp/product/B00M0CS1FC/) (Warning, this stuff is very brittle, I do not recommend using in an AMS)

All parts were modeled in Solidworks by myself after measuring the actual bricks with calipers. Some parts fit great some are tight and some are loose, but overall it holds together.

Three wall loops and 10% infill on gyroid should be good but you can tweak to your liking.

Supports can be really tricky and difficult to remove. I recommend the settings I have in the Print Profile.

Assembly

Follow the instructions below to assemble. Pretty simple.

That about covers it, I think… Happy printing and building!

Comment & Rating (16)

@kozakt

I had to glue four cubes so they wouldn't fall. The result is nice. Thanks.

The designer has replied

@TimboZer0

Thanks for the feedback! Glad you like it. =) Just curious; what parts did you have to glue?

@user_365272071

Print Profile

0.2mm layer, 3 walls, 10% infill

this thing is awesome. some of the parts don't stay on tho. Going to try and add some gloop and see if it makes it better. Thanks for the model, made 2 for the kids

The designer has replied

@TimboZer0

Thanks for the feedback! This was my first try at a 3:1 upscale and I have learned a lot since, so keep an eye our for an updated version in the near future!

@DuckPrint

Print Profile

0.2mm layer, 3 walls, 10% infill

The designer has replied

@TimboZer0

Looks awesome! Great printing job. =)

@Cummins_22x14

Print Profile

0.2mm layer, 3 walls, 10% infill

some parts needed to be glued on so they didn’t fall off

(Edited)

The designer has replied

@TimboZer0

Thanks for the feedback! Just curious; what parts did you have to glue?

@bradnelson63

It turned out very well. I didn't have the exact colors on hand that you used but I made do. Most parts fit fine...sometimes a little snug. In a couple cases I had to file down a couple of the plugs a little, but no big deal. Fine job on the modeling and presentation.

The designer has replied

@TimboZer0

Excellent! Thanks for the feedback. I'd love to see a photo!

@nexusonkel

Print Profile

0.2mm layer, 3 walls, 10% infill

Top Ausdruck und sieht neben dem Original von Lego Top aus👍

@Maltee

Print Profile

0.2mm layer, 3 walls, 10% infill

ist ein sehr schönes Projekt

(Edited)

@m.marradi

Print Profile

0.2mm layer, 3 walls, 10% infill

@srsawyer

Print Profile

0.2mm layer, 3 walls, 10% infill

@mallojoe

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.