ECONOMICAL STACKABLE DRAWERS - WORKSHOP EDITION

Organize your space in a smart and stylish way with our Stackable Drawer Organizer! Designed to be quickly printed in vase mode, these organizers offer a versatile and practical solution for keeping your small (and not-so-small) items neat and within reach.

With three drawer configurations available and a multipurpose shelf, you can tailor these organizers to your specific needs. Plus, each drawer has the option to incorporate internal dividers, allowing you to further segment space and organize efficiently.

The unique interlocking and stacking design allows you to combine multiple organizers into one solid, stable structure. The trim not only adds an aesthetic touch, but also allows you to create a color-coded system for even more intuitive organization.

Whether it's your desk, bookshelf or workshop, these Stackable Organizers are the perfect solution to keep your space tidy and your items easily accessible.

⚠️ADVERTENCIA!: REMEMBER THAT THE BODY AND DRAWERS WERE DESIGNED TO PRINT IN "VASE MODE". IF NOT SELECTED, A COMPLETELY SOLID MODEL WILL BE PRINTED.

MODEL AVAILABLE FOR PERSONAL USE ONLY. DISTRIBUTION/COMMERCIALIZATION IS PROHIBITED

If you are looking for a smaller but just as stylish and sturdy Stackable Organizer, we recommend you check out this publication:

MI_RINCON

ECONOMICAL STACKABLE DRAWERS - FAST PRINTING

• 3.7k views
• 20 likes
• 21 downloads
• 1 collection
• 0 comments
• 0 makes

Download US$2.90

That's it!

Thank you for taking the time to review our design. If you have

any questions, comments or suggestions, please don't hesitate to get in touch.

We hope the kit is to your liking!

The organizers you can see in the photos are printed on an Ender 3 in PLA, with a 0.8mm nozzle, with a line width of 0.96mm and a layer height of 0.5mm. They possess an amazing strength that more than meets our needs and is optimal for a workshop type environment, for rough and intensive use.

**BODY

Approximate print times (at a speed of 45mm/s) and quantity of material required:

• Estimated time: 2h 54min

• Amount of material: 116gr (38.96m)

**TRIM

This particular piece was printed in conventional mode (no vase mode) as the piece does not take long to print, plus it was not designed for such a mode.

• Layer height: 0.2mm

• Line width: 0.88mm

• Adhesion to the printing plate: Edge (since it has little contact surface).

• Printing speed: 45mm/s

• Estimated time: 30min

• Amount of material: 8gr (2.54m)

**VERTICAL SEPARATOR

Approximate print times (at a speed of 45mm/s) and amount of material required:

• Estimated time: 39min

• Amount of material: 24gr (8.12m)

JACKS

Approximate print times (at a speed of 45mm/s) and quantity of material required:

• LARGE:

  • Time: 1h 46min
  • Consumption: 71gr (23.94m)

• MEDIUM:

  • Time: 1h 14min
  • Consumption: 49gr (16.36m)

• SMALL:

  • Time: 46min
  • Consumption: 30gr (9.99m)

**DRAWER DIVIDERS

Approximate print times (at a speed of 45mm/s) and quantity of material required:

• LARGE DRAWER:

  • Time: 28min
  • Consumption: 15gr (5.13m)

• MEDIUM DRAWER:

  • Time: 13min
  • Consumption: 8gr (2.67m)

• SMALL DRAWER:

  • Time: 12min
  • Consumption: 4gr (1.43m)

STANDING

Approximate print times (at a speed of 45mm/s) and quantity of material required:

• Time: 45min

• Consumption: 28gr (9.42m)

SUGGESTIONS

• For optimum quality and correct printing, print files only in the orientation shown when opened in your laminator (CURA,PRUSA SLICER....).

• When installing the Vertical Separator, to use the Small Drawers, you must:

1. Tilt it to one side and tuck it into the Body.

To lock it, you must first align the lower guide groove, then bend it slightly and lock it with the upper guide groove.

• The Embellisher is glued to the Body with a little cyanoacrylate.