Cherry Blossom Door Hanger

Copyright Claim

Cherry Blossom Door Hanger

Boost
31
37
9

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.16mm layer, 4 walls, 15% infill
0.16mm layer, 4 walls, 15% infill
Designer
3.7 h
1 plate
5.0(3)

0.16mm layer, 4 walls, 15% infill
0.16mm layer, 4 walls, 15% infill
Designer
4 h
1 plate
5.0(1)

Boost
31
37
9
0
30
12
Released

Description

Celebrate Cherry Blossom Season with this beautiful door hanger! I used 6 different colors for this print but feel free to use less!

 

I added a profile for 4 colors in case you only have 1 AMS!

 

If you like what I'm doing, consider buying me a coffee. Much thanks!

Buy Me a Coffee :)

Comment & Rating (9)

Please fill in your opinion
(0/5000)

Print Profile
0.16mm layer, 4 walls, 15% infill
awesome model and print profile
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
Easy, beautiful print! Highly recommend.
0
Reply
Hi, it looks like 6 colors not four? Any advice for 1 ams?
The designer has replied
0
Reply
Hi! Thanks for pointing this out. My recommendation is as follows: I would keep the base color so you don’t have to change as many times (if you want you could make the base color the same as the lines the cherry blossoms are on (the brown in my photos) Obviously keep the pink in the flowers if you wanted to keep the two different center colors you could remove the yellow. I made it that way for my bigger prints, but it is so small you wouldn’t see it hanging up. if not, you could make all the centers one shade of pink as well. I believe that is four colors. Let me know if this helps!
1
Reply
I just added a Profile for 4 colors based on my recommendations. Feel free to use that one
1
Reply
Thank you! These and your coasters are lovely, so I really appreciate you taking the time.! I am near an area well known for cherry blossoms, so they are spring theme here!
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
No more