Stinger 2 magazine cover with long tilted Picatinny rail /Magzin Cover m. geneigter Picatinnyschiene
Stinger 2 magazine cover with long tilted Picatinny rail /Magzin Cover m. geneigter Picatinnyschiene
Print Profile(1)
Description
Stinger 2 magazine cover with long Picatinny rail
Extra long forward inclined Picatinny rail on an alternative magazine cover for the standard magazine of the Steambow Stinger AR 6 II Tactical or Compact
The STL is provided free of charge! If you like the cover and would like to support us and the further development of print files, please send any amount via Paypal to www.paypal.me/3dboard/
The cover is optimized for use with the StingerLock. This cover with a tilted Picatinny rail is ideal for short longer distances above 10 meters. It makes it easier to adjust a Red-Dot or a scope at longer distances. A cover with a straight Picatinny rail for shorter distances up to 10 meters can be found here.
Printing instructions:
It should be printed with supports. An infill of 80% is recommended for best toughness. I'm fine with 25% Gyrooid. At least PETG, better PETG-CF or comparable should be used as printing material.
The spring of the original magazine cover and the two screws with which it is attached can also be used on the printed cover. However, it is recommended to melt short M3 threaded inserts into the cover and to fix the spring with 4mm long M3 screws. This makes it easier to swap the spring between the different versions of the cover.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
