I made a remix of the great spool adapter from BRADCAD

This adapter is remixed for Kingroon spools with an inner diameter of ~75.5 mm.
With the adapter, these spools also fit on the AMS Lite.

I have not only changed the size but also saved some material to make it cheaper.
It is quite possible that the adaper will also fit other spools.
I have used PETG.

During assembly, it is necessary to bend the part that acts as a spring inwards to fix the coil. This prevents the coil from coming loose from the AMS lite. If you want to remove the adapter, press with both thumbs on the opposite side and it can be pulled out easily.

Please note: Some reels have a slight taper on the inside walls of the diameter. If the adapter does not fit properly, try inserting it on the other side of the roller.