Unicorn Baby Lightbox | LED Lamp (only 4 colors ) by 3Dacores

3Dacores

Toys & Games>Characters

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 6% infill

Designer

5.8 h

2 plates

0.2mm layer, 3 walls, 15% infill

5.1 h

2 plates

4.9(19)

Boost

152

245

327

Released

Description

Illuminate your space with enchanting radiance using our Unicorn LED Lamp.

This whimsical creation adds a touch of magic to any room, casting a soft, colorful glow that captivates and delights.

Perfect for bedtime stories or as a charming decor piece, the Unicorn LED Lamp brings a fantastical ambiance to your surroundings.

Let the mystical allure of unicorns brighten your nights with this delightful and eye-catching lighting accessory.

Attention:
The hole for the LED strip/light was included in Bambu Studio profile so that it is possible to change the dimensions.

Comment & Rating (27)

@user_2053178225

Boosted

Printed it! Looks awesome ! Backplate not printed in black! so it have a Bit of Back lighting!

The designer has replied

@3dacores

Thank you for printing the design! I looks great! Happy printing without errors and spaghetti :)

@user_772331495

what color did you use for the back ? :)

@user_2053178225

Boosted

Replying to @user_772331495 :

Pla Basic Rosa 10203

(Edited)

@moldaz

The little one loves it. Thanks!

(Edited)

The designer has replied

@3dacores

Thank you for printing the design! I looks great! Happy printing without errors and spaghetti :)

@wolfboywestphal

Hello printed the unicorn and it had a few issues, had little tabs of filament around the first layers, on the 3rd try I hoped the hot end would iron them down, I raised the bed temp to 45, When I removed it from the bed I found the sections between pink, blue, black were not connected in some places, I carefully laid it on a table and used thin super glue on the inside and smeared it with my finger to force the glue into the cracks all on the inside surfaces, let it dry and it seems to be holding all the panels in place, they were like stained glass panels, I didn't change the size, or alter the print, it's a cute print be careful when removing it from the bed, I think it's a great and adorable print, Thank you for sharing it with us Wolfboy

The designer has replied

@3dacores

Hello, Thank you for the feedback andprinting the design. Happy printing without errors or spaguetti :)

@RoxxieLola

Print Profile

0.2mm layer, 3 walls, 15% infill

Love it!

@ItsM33T00

Print Profile

0.2mm layer, 3 walls, 15% infill

great print

@FrancescoM

Print Profile

0.2mm layer, 3 walls, 15% infill

perfect

@grecoxsym91

Print Profile

0.2mm layer, 3 walls, 15% infill

@skibbad

Print Profile

0.2mm layer, 3 walls, 15% infill

@gerrit_flauger

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1420111797

Print Profile

0.2mm layer, 3 walls, 15% infill

fun build for my daughter

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (27)

License

Related Models

Name Lightbox, Led lamp

Daffy Duck Hueforge 4 Color

Stitch Picachu Lightbox LED Lamp

Ash and Pikachu Hueforge 4 Color