Medicine box with hinged insert tray:

Get ready to revolutionize your medicine storage game, meet the Medicine Box with a playful hinged insert tray! This isn't just any ordinary organizer – it's a hassle-free, print-in-place box.

Say goodbye to the days of jumbled pill bottles and scattered supplements. With its built-in tray, our Medicine Box keeps your essentials neatly tucked away and easily accessible.

This is a great solution for organizing your pills or other products. A hinged box print in place, in 1 piece. There are 3 print profiles, 1 for the box ,1 for the hinged insert tray and a third print profile for the insert tray with labels. With this third print profile you can customize the labels to fit your needs.

It's not mandatory to print the hinged insert tray, it's an option to complete the box.

The box has a closing mechanism and clicks the bottom and top part together.

• Simple to print model
• Low cost print
• No assembly for the box
• Great organizer for small things: medicine, fishing stuff, small bolts, …

Dimensions for the box:

• Width: 40 mm
• Height: 12 mm for top and 12mm for the bottom, 24 mm in total when closed
• Length: 125 mm

Guide for the box:

• Select the print profile for the box
• When you printed the box, please let it cool down completely
• Gently start moving the lid towards the bottom part to start movement
• The hinges are very strong and you can open and close the box hundreds of times without any problem

Assembly guide for the hinged insert tray:

• Select and print the print-profile (2 or 3) for the ‘hinged insert tray’. The parts will be printed by object
• Check the picture below for assembly
• Check the 2 rear swing arms, there is a right and left one. The front arms are the same. Just gently click them in place.
• I used a piece of double sided tape to hold the tray to the box

Print time and used material:

For the box:

• Print time:1 hour 15 minutes
• PLA filament, approximately 46gr

For the hinged insert tray:

• Print time: 1 hour 10 minutes
• PLA filament, approximately 29gr

If you find my model useful, please like :-)

My other models: https://makerworld.com/en/u/1830894672