Santa Beardie Variants - Subscriber Exclusive
$1.75 Santa Beardie Variants - Subscriber Exclusive
Published 2024-02-08T17:09:34+00:00
We've got two versions of a Christmas themed Bearded Dragon, one with the beard and one without!
Here is a quick video showing how to remove the Pre-Support and snap-fit the head onto the body (demo'd on the Leopard Gecko): https://youtu.be/IIBjZ6EOQGE
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
3D PRINTING SETTINGS
Recommended:
Head with Pre-Supports: (removable supports are built into the head model, no additional supports needed)
Body with custom Brim: (Print-in-Place, Brim geo is built in so no need to generate one.)
Extras:
Body: Print-In-Place. No Supports (Aside from a Brim if needed)
3MF: includes a Multicolor 3MF that is compatible with both PrusaSlicer and Bambu Studio
Good bed adhesion is a must! I highly suggest using a BRIM or RAFT to make sure the tail stays upright as the segments build, or use the "customBrim" version of the body.
10-20% Infill.
3 Walls.
Here is a quick video showing the easiest method for snap-fitting the head onto the body: https://youtu.be/DWsYu2BY7ow
Scale to your liking! 100% creates a 10" model, so that will make it easy to scale it to your desired size. (80% = 8", 75% = 7.5", etc.) Depending on your printer tolerances, you should be able to print close to 60-65% before the joint function may start to become compromised. YMMV
Date published | 08/02/2024 |
Price | $1.75 |
Support Free | YES |