Experience the ultimate way to challenge your mind with the Tower Maze, a fresh twist on the universally loved cylinder labyrinth puzzle game.
It's design of old tower will make it stand out among the rest. A simple yet challenging maze will push you to get through to the other side.
Print specifications:
Maze case:
Print Dimensions: Height = 7.2 cm (2.84 Inches) | Diameter of 4.2 cm (1.65 inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 18 Minutes
Amount of material required: ~ 9.2 m
The maze:
Print Dimensions: Height = 7.7 cm (3.03 Inches) | Diameter of 4.1 cm (1.61 inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 15 Minutes
Amount of material required: ~ 8 m
TOTAL PRINT TIME: 2 Hours and 33 Minutes
TOTAL PRINT MATERIAL: ~ 17.2 m
Other levels can be found here:
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.