BIGTREETECH Panda Touch cable cover
Copyright Claim
BIGTREETECH Panda Touch cable cover
Boost
24
50
10
Print Profile(1)
0.16mm layer, 4 walls, 15% infill
Designer
1.1 h
1 plate
Boost
24
50
10
1
94
90
Released
Description
Model
BIGTREETECH Panda Touch cable cover
Hi, I have created a cable cover for the Panda Touch additional display for the P1S or P1p printer. Just stick it on with double sided tape. It is my original model.
Procedure:
Route the cable behind the display and into the hole on top of the printer. Then you pull the cable through the bottom to the integrated USB in the printer, which will power it. The display will start automatically when the printer starts.
The hole through which the cable will run.
Dimensions: 180x30x8
Supports: NO
Material: whatever material I used, Bambu matte pla
Filler: 15% honeycomb
My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm.
Comment & Rating (10)
All
hi, what is the modem in the photo used to hold the panda touch?
The designer has replied
0
Reply
hi, It Is the holder what i got with panda touch in the box
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
this is great thanks
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld