This is my case to store your jewelry or other valuable things in it!

The unique design of the lid makes it something very special that you would like to show off.

You can customize the case with different colors to suit your own taste. Make it your own unique piece!

I designed another version with the measurements of 150x90mm “medium”. Have a look at it and my other models: https://makerworld.com/en/u/1597610120

The lids geometric pattern is inspired of the ancient, holy geometric flower of life. The Flower of Life consists of nineteen circles and embodies the origin of all existence. It is a symbol of perfect lawfulness and beauty. The flower of life is a well known energy image that is often visualized in meditation to energetically charge the body and soul.

The model consists of: 3 parts, case, lid and handle

Tools needed: a drop of your preferred glue

I personaly use “UHU Hart” glue to glue pla parts together. It works best for me and leaves no residues.

Assembly instructions:

Glue the handle to the lid. Use your preferred glue and place a small drop in the hole on the top of the lid. Place the handle in the hole and allow the glue some time to harden. The recommended “UHU Hart” hardens fast after you placed the part.

Recommended filament: PLA

Hotend: 0,40mm

Print time: case 1:21h, lid and handle 1:21h

assembly time: 2 minutes

Print recommendations:

• layer height 0,20mm
• 2 wall loops
• top/bottom shells 4 layers
• top/bottom shell thickness 0,80mm
• sparse infill 10%
• sparse infill pattern “gyroid”
• order of walls “outer/inner”
• other layers speed → outer wall 50mm/s

Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.

Before printing, make sure your build plate has a decent adhesion. Bad build plate adhesion is not related to the model.

If you were satisfied with the model, i would appreciate it if you leave me a like and a decent rating. Thank you in advance!