[3DP RNS] Corpion_V1.0 by 3DP RNS

3DP RNS

Toys & Games>Characters

Print Profile(5)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Designer

7.5 h

1 plate

4.8(81)

No Brim,Joints are easy to move,0.02mm layer, 2 walls, 15% infill

2.9 h

1 plate

4.9(8)

No Brim,Joints are easy to move,0.2mm layer, 2 walls, 15% infill

6.6 h

1 plate

4.7(6)

one color + scaled for a1 mini

3.1 h

1 plate

4.2(13)

Click to see more

Boost

537

767

244

1.8 k

888

Released

Description

★ Reached 300 YouTube subscribers! Unveiling a new robot!

[3DP RNS] Corpion V1.0 (3D Printed Robot)

Series : 8 or more Legs / Scorpion Type [Youtube Video]
This Is an all at once print. Assembly not required :)
If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
Thank you for your subscribing! It means a lot to me :)
Commercial License [Patreon]

※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim.
If removing Brim is inconvenient or challenging, I don't recommend printing it.
Also, joint functionality may vary depending on the printer and filament you use.
This robot may be complex in shape, making it difficult to print.

However, I believe it will be a robot that can satisfy you.

▶ Next Robot is ???

Which one should be unveiled first, the motorcycle for workers or the Snake robot?

Of course, If the YouTube subscribers increase, both will be revealed.

Comment & Rating (244)

@RalfDiedrichsen

Great design. Came out well, but not all of the joints work perfect. I used Extrudr PLA NX2 for all colors

The designer has replied

@3DPRNS

Thank you for commenting on the photo and printing it out. The pink scorpion looks unique. However, When I looked at the picture, it seemed fine, so which joint had an issue?

@RalfDiedrichsen

Replying to @3DPRNS :

Both claws. It is not a problem but moving them will cause a break. It is not pink, it is red :-) Bad lighting

@RalfDiedrichsen

Replying to @3DPRNS :

Both claws. No big issue but moving them more than shown will cause a break. It is red, not pink. Bad lighting :-)

@MBY_Prints

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Turned out great!

The designer has replied

@3DPRNS

Your print is perfect! The robot color is also sophisticated. Are the two dots on the face eyes? You added them. They fit well. You took the picture beautifully. Very nice. Thank you for the photo, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@MBY_Prints

Thank you for the for. The two dots are eyes. My son didn't like how it didn't have eyes so I added the two dots there just to make him happy. I will subscribe to your YouTube channels. thanks again.

@Toxin_Labs

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

beautiful model, unfortunately could not free all legs because of the brim which was too difficukt to remove in between legs. Maybe I did something wrong? my filament could be old

(Edited)

The designer has replied

@3DPRNS

Thank you for trying to print. Upon zooming in on the picture, it appears that your print has excessive shrinkage, and the extrusion seems uneven. Was it printed with a Bambu printer?

@Toxin_Labs

yeah, only thing that could have been was the filament which may have been old. I love your designs too much to only leave 4* though! I fixed the rating ;)

@3DPRNS

Replying to @Toxin_Labs :

Thank you very much! I'll make an effort to work harder :)

@KlemK

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Printed like magic. The collections is amazing.

The designer has replied

@3DPRNS

Now it seems like you've printed out all of my robot collection. Your output always looks great. Thank you for the photos, comments, and prints.

(Edited)

@KlemK

Boosted

Replying to @3DPRNS :

Indeed, the Maker World robots are complete. The Patreon is next. Beware, the your robots are on the march :).

@takilara

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

awesome model!

The designer has replied

@3DPRNS

Your robot looks really cool! The joints seem to be working fine too. Thanks for sharing the picture, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@takilara

Replying to @3DPRNS :

yeah all the joints works. I was deliberately a bit careful on the inner joints of the claws, but they came out beautifully!

@hurdmcar000

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

looks really cool

The designer has replied

@3DPRNS

Wow, your robot looks awesome with a black body and yellow-orange accent colors. The joints seem to function well too. You took great photos. Well done! Thanks for sharing the photos, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@hurdmcar000

Replying to @3DPRNS :

will do!!

@TSTech

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

I love all of these prints

The designer has replied

@3DPRNS

Oh, you printed the Corpion beautifully. The clean combination of white body with blue and black accent colors looks really cool. The joints seem to be working smoothly without any issues. Thank you for the picture, comment, and printing.

@TSTech

Boosted

Replying to @3DPRNS :

I've been slowly printing all of em, My daughter loves them

@doc911

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

very cool model. joints all worked perfectly right off the textured PEI plate on my Bambu X1C. Giantarm gold silk PLA with Envirolaser black PLA plus for the accents. no brim, no supports. 53 colour changes over 5.25 hours. I also ha e printed the 6 legged spider model. one with brim and once without. gonna skip the brim unless it is a tall or thin piece.

(Edited)

The designer has replied

@3DPRNS

The print quality is amazing. You printed it in two colors, and the combination of colors makes the robot look really cool. Thank you for printing the robot, leaving photo comments, and sharing your experience in detail. As the number of YouTube subscribers grows, new robots will be revealed. Don't forget to subscribe to my YouTube :)

(Edited)

@timberxwolf

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Turned out great!

The designer has replied

@3DPRNS

Your print is perfect. The color choice is great too. Well done! The floor pattern is impressive like a game board. Thank you for the photos, comments, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@mrmike

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

love them all! thank you for sharing them!

The designer has replied

@3DPRNS

Wow, your printing is successful. You printed three robots. The joints look fine, and the colors are great too. Well done! Thanks for the pictures, comment, and printing! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Hexagun - Weapons Compatible With 3DP RNS Worker

vorkosigan78

[3DP RNS] Hexnake_V1.0

3DP RNS

753

2.6 k

[3DP RNS] Headless_V1.0

3DP RNS

806

2.8 k

[3DP RNS] DNS Case_V1.0

3DP RNS

412

1.1 k