Show your pride with the rainbow themed dish! This model requires a printer with multi-color capabilities.
2 sizes are available. X and Y dimensions are different, but both models are the same height. This allows you to print them side by side without adding any extra color swaps. Both models are available as 3MF's to allow for the ability to quickly set colors.
Print Settings
If you are using a printer with an AMS or similar system, there is quite a bit of waste with this model. I recommend filling your buildplate as full as possible to help lower the proportion of waste. I find that a mixture of large and small dishes can fit nicely.
The following filaments were used in the pictures above: