Silly Streets Simple - Hotwheels Compatible Road Track Pack for Matchbox Toy Cars - Single Lane by SillySnax

SillySnax

Toys & Games>Other Toys & Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

13.5 h

11 plates

5.0(9)

Boost

139

Released

Description

A variety of Silly Streets for matchbox and hotwheels cars.

Compatible with hotwheels track and connectors.

Single Lane Version, A Dual Lane Version is also available on my profile.

My son has been collecting hotwheels sets and needed a way to connect them to each other.

The hotwheels city roads are not available in Australia so I wanted to print something similar to the matchbox roads I had as a child.

I started out with a few basic single lane pieces, but that quickly escalated!

I plan to continue adding to the collection of pieces.

Comment & Rating (10)

@dreamer

Something is wrong... or you had printed a bigger size straight line, bigger than the 9inches, or t I have no idea how to match your photo... the pieces in orange that i used has the same size of the blue ones you have used... the curves are the 6inch radius, if where the bigger ones, than the difference would be bigger. The gap missing is the size of the exit ramp. It is possible for the X1C and P1S/P1P to print the 12inches long straight if placed in diagonal on the plate, but you didn't place it on the 3MF file...

@colonel315

Print Profile

0.2mm layer, 2 walls, 15% infill

awesome set. thank you. works so well

@user_2385734983

Print Profile

0.2mm layer, 2 walls, 15% infill

works well with printed and bought parts.

@user_751683823

Print Profile

0.2mm layer, 2 walls, 15% infill

these are great! print easy and very well designed. the tolerance for the clips are perfect. snug enough to lock together, but looser than the hotwheels branded tracks. perfect for children.

@Hearthquake

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3290837088

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3201020236

Print Profile

0.2mm layer, 2 walls, 15% infill

@richard.olvera.

Print Profile

0.2mm layer, 2 walls, 15% infill

@branflakes

Print Profile

0.2mm layer, 2 walls, 15% infill

@Gaineyanthony

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.