Technic compatible meccanum wheel
Copyright Claim
Technic compatible meccanum wheel
Boost
15
31
9
Print Profile(2)
side plates and tubes 0.2mm layer, 2 walls, 15% infill
Designer
3.3 h
1 plate
Wheel 0.2mm layer, 3 walls, 0% infill
Designer
1.1 h
1 plate
Boost
15
31
9
2
43
12
Released
Description
Technic brick compatible meccanum wheel for robots.
you will need 9 legoTechnic or alternative 6L axles, and 2 or 3 pins.
The outer wheels should be printed from flex filament or molded from silicone for best results. Or some other solution like heatshrink tube.
Comment & Rating (9)
All
excuse me，this model is missing the screw part
The designer has replied
0
Reply
Hi, which screw do you mean? There should not be any screws needed to assemble this, the parts you use to connect the parts together are L@go or l@go compatible pins and 6L axles, as mentioned in describtion.
0
Reply
Replying to @horcikdesigns
thanks，i got it
0
Reply
Print Profile
side plates and tubes 0.2mm layer, 2 walls, 15% infill
👍
The designer has replied
1
Reply
Thanks!
0
Reply
Boosted
VERY COOL!
The designer has replied
0
Reply
Thank you!
0
Reply
Print Profile
side plates and tubes 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Wheel 0.2mm layer, 3 walls, 0% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld