PTFE clip P1P,P1S and X1C
Copyright Claim
PTFE clip P1P,P1S and X1C
Boost
229
469
89
Print Profile(4)
0.08mm layer, 2 walls, 100% infill
Designer
29 min
1 plate
0.12mm layer, 2 walls, 15% infill
21 min
1 plate
PETG - 0.16mm layer, 2 walls, 15% infill
17 min
1 plate
ABS 0.16mm layer, 2 walls, 15% infill
18 min
1 plate
Boost
229
469
89
1
960
506
Released
Description
PTFE cable chain clip P1P,P1S and X1C
Comment & Rating (89)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
not really issues in printing, but gaps because of classic wall generator. 0.08 layer for a 0.4 nozzle is mostly senseless.
Thats also why I upload a different print profil what suits better to a 0.4 nozzle
1
Reply
You can change the layer height with a two clicks. I have no idea why some of y'all are so up in arms about this. I print a vast majority of detailed models at 0.08 (various materials) with no problem. Don't know how it's "senseless" unless you mean the time it takes, but then just start the print right before you go to bed. Seems like half of y'all bought a Bambu printer just so you could forgo critical thinking skills.
(Edited)1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Super klasse
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Auch für hinten gut nutzbar
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
good
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
alles bestens
0
Reply
after 5 tries, I change the bed temp down from 70 to 55 and print per object instead of per layer, and used the .12 layer that did the trick. All good now. Thanks @GingerCatLady for the profile more compatible with the .04 nozzle on the X1 Carbon.
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Super, passen perfekt und haben auch mein Problem gelöst !
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
there great it will not let me put 5 starts because I cancelled it but that is because some got messed up but most finished so not sure why it says canceled
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
not finish
Other Issues
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld