not really issues in printing, but gaps because of classic wall generator. 0.08 layer for a 0.4 nozzle is mostly senseless.
Thats also why I upload a different print profil what suits better to a 0.4 nozzle
You can change the layer height with a two clicks. I have no idea why some of y'all are so up in arms about this. I print a vast majority of detailed models at 0.08 (various materials) with no problem. Don't know how it's "senseless" unless you mean the time it takes, but then just start the print right before you go to bed. Seems like half of y'all bought a Bambu printer just so you could forgo critical thinking skills.
after 5 tries, I change the bed temp down from 70 to 55 and print per object instead of per layer, and used the .12 layer that did the trick. All good now. Thanks @GingerCatLady for the profile more compatible with the .04 nozzle on the X1 Carbon.