Tube ventilation cap/filter
Print Profile(0)
Description
Cap for the ventilation tubes in your aquarium system to prevent large particles from entering
I uploaded several sizes to fit various standard sizes of tubes and pipes. The sizes are the following:
| Size | Internal Diameter | Outside diameter | Thickness | Height | Max spacing |
| 20 | 20 mm | 24.8 mm | 2.4 mm | 26.9 mm | 3.9 mm |
| 25 | 25 mm | 29.8 mm | 2.4 mm | 29.2 mm | 4.3 mm |
| 32 | 32 mm | 37 mm | 2.5 mm | 32.6 mm | 4.4 mm |
| 40 | 40 mm | 45.8 mm | 2.9 mm | 41 mm | 4.9 mm |
| 50 | 50 mm | 56.2 mm | 3.1 mm | 52 mm | 5.4 mm |
| 63 | 63 mm | 70.2 mm | 3.6 mm | 59.3 mm | 6.1 mm |
| 75 | 75 mm | 83 mm | 4 mm | 68.7 mm | 6.5 mm |
| 90 | 90 mm | 98.8 mm | 4.4 mm | 81.6 mm | 7 mm |
| 110 | 110 mm | 120 mm | 5 mm | 97.9 mm | 8.6 mm |
I also uploaded the Fusion 360 file with all the parameters set for you to make your custom size cap if none of the above fit your pipe.
Materials: Pick materials that are safe for both your fish and plants. It's usually recommended to use ABS or specific food-safe PLA, and it's often advised to coat the print in a safe epoxy to seal it.
To legally sell PRINTED models, you may obtain my permission through this link:
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
