X1, P1P, and P1S LED lighting with hidden Ventilation Top Glass Riser
Copyright Claim
X1, P1P, and P1S LED lighting with hidden Ventilation Top Glass Riser
Boost
14
39
12
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
8.1 h
2 plates
Boost
14
39
12
0
61
74
Released
Description
I've tried one or two models, but there were some overhangs and design issues, so I decided to come out with my design.
Ventilation openings have cover walls in front of them and light does not leak out.
Print without supports, 0.20mm, PETG
Using mine for more than six months already without any issues at all.
Comment & Rating (12)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
works perfect
0
Reply
Love this design, do you have a link (Amazon hopefully) for the LED lights you used? Thanks
The designer has replied
1
Reply
I bought the led from a local shop, nothing special about it. Any led light strips with decent quality should do the job
0
Reply
do you think pla+ esun can be used for?
The designer has replied
0
Reply
probably yes, I printed my risers out of petg just to be on the safe side
1
Reply
ciao, come hai fatto a far passare il filo dei led? ho visto che il foro per il passaggio e' dietro mentre la presa e' davanti, mi puoi spiegare per piacere?grazie!
0
Reply
hey how good is the ventilation of this riser ? dose it vent enough to print pla with the front door closed and top still on without too much heat bulding up inside thanks
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld