STL silicone mold. Planter mold Сandle container + silicone pouring formwork STL

I designed a Planter that can also be used as a container for candles, it has a 23 mm socket at the bottom for a wick holder, also a 3D model of holder for a 15 mm wooden wick.
My designs are not only modeled but also tested in real life — I am experimenting with the optimal sizes and shapes for printing and pouring.

❗️ Please pay attention to the top view, the feature of this design is the tilted edges (not true square)

Dimensions:
Height - 60 mm (2.4 in)
Length - 80 mm (3 in)
Elipse diameter - approx. 70 mm (2.7 in)
Volume - 150 ml (5 Oz)
Wick holder - 23 mm Commercial license
For concrete and plaster

Silicone required - 380 ml (13.5 Oz)
To attach the master model to the platform you can use double-sided tape or mount it with M5 screw and nut.

You will need to expand holes in the formwork joint with an 8mm drill bit to fit the pins perfectly. I modeled the holes a little smaller than 8mm.
This is important! Use a non-silicone release spray like "Ease Release 200" for easy first demolding and vacuuming of the silicone before pouring.

This is a digital download, not a physical product. Nothing will be shipped out. This will automatically be sent to you via email.

license — Personal use only
Commercial license available by subscription to my Patreon — patreon.com/LaO2Lab
As long as you are Active Subscriber, you will be able to sell physical goods created from my Design
Please notice: My digital content (STL files) is never allowed to be resold or shared

Dimensions:
Height - 60 mm (2.4 in)
Length - 80 mm (3 in)
Elipse diameter - approx. 70 mm (2.7 in)
Volume - 150 ml (5 Oz)
Wick holder - 23 mm
For concrete and plaster