Simple Turn Table for small models
Print Profile(2)
Description
I wanted to create something to make it a bit easier to photography and film some of my smaller to mid size figures and this is what I came up with. Works really well for what it is. I'm sure there are some super nice ones out there but for a few quick prints and one bearing and your off to taking some cool photos and filming some nice quick short videos.
I used a 608 2RS Ball Bearing size (8mm x 22mm x 7mm)
Here is one spot on amazon you can get some if you don't have any.
https://www.amazon.com/gp/product/B08XVFSZTF/ref=ox_sc_act_title_1?smid=A3V84ASJQQ5YY4&th=1
The bearing pushes into the top plate first and should be flush once inserted correctly. Then you line the bottom plate up and carefully slide it in a bit and flip it over and apply a little pressure in the middle to finish pushing it down all the way. No need to force it. It will seat down and then you are ready to start taking pictures and shooting videos.
Comment & Rating (7)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
