Needed a stand to keep my drivers tidy. It is progressively levelled to help make finding the right driver easy. I designed this with popular 20mm diameter drivers in mind. Unfortunately wider one's will likely not fit due to the size of the driver holes. I have provided a file for printed 30mm spacers if you would prefer not to buy separate anodized ones. Additionally, I've listed M3x10mm screws for assembly. You could likely get away with other lengths, but these are what I would recommend as they have worked well for my version. 

Assembly tips/ instructions:

Attach 4 spacers to both the top and middle plates using 8 M3 screws. laying the top plate flat with spacers pointing up, position the middle plate with spacers pointing up above the top plate. Locate by aligning the countersunk screw holes with the spacers and then fasten together with 4 M3 screws. Finally, attach the bottom plate to the middle plate's spacers. Again, locate by aligning the countersunk holes of the bottom plate with the holes of the spacers. Fasten with the final 4 m3 screws. Study the last 3 pictures to help as a visual aid. 

The provided spacers are self tapping, simply hold them in place while tightening with a pair of pliers. 

Print 8 spacers and 1 of each plate.

Requires:

16 M3x10mm screws.

Pliers.

Optional:

8x 30mm anodized M3 Spacers and blue Loctite to prevent the metal spacers from coming lose over time. 

Anti-slip rubber feet for the base.