I made this adapter for the top basket, it is not needed for the bottom basket as the build plate fits snugly. What I found out is that the mighty's build plate has enough wiggle room for it to move and with the right angle and distance can fall in and damage your print.

The purpose of the adapter is to remove the possibility for the build plate to move.

Printing:

• Layer height of 0.3mm
• 25% infill
• No supports or rafts

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.3

Infill:

Filament:PLA black

Category: 3D Printer Accessories