This print is about 240x160mm with 4 color changes
I WILL BE ADDING A PRINT WITH A FRAME AND SLIGHTY THICKER TO TAKE AWAY THE FLIMSY
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #5 (0.56mm) swap to BambuLab Green
At layer #11 (1.04mm) swap to Jade White
At layer #18 (1.6mm) swap to Yellow for the rest.