Mitsubishi Lancer VIII, Evo x Ralliart 2008+ Defroster Vent Gauge 52mm, Mitsubishi lancer Gauge, Pridavny budik mitsubishi

Hello, I created a model of an additional gauge holder for ventilation.
It fits Mitsubishi lancer VIII or lancer RA, EVO X

The handle is intended for a 52 mm Gauge.

I am the owner of a model that I thought up, designed and made, it took me a lot of time to create it, the best part is that it sits in the ventilation, the Gauge is turned towards the driver and does not interfere with the view from the window.

The Gauge Holder is fixed with a double-sided tape and a plastic puller.
A hole was made in the ventilation and the cable is then led through the hole in the ventilation behind the dashboard/alarm clocks to the fuse box.

The model requires printing support
Number of walls 4
Layer height 0.16
Material PETG, ASA, ABS

Translate for Czech Republic/Slovakia

Ahoj, vytvoril sem model držák pridavneho budiku do ventilace.
Sedi to na Mitsubishi lancer VIII alebo lancer RA, EVO X

Držak je určen pro 52mm prumer budiku.

Jsem vlastnik modelu ktery sem si vymyslel, navrhl a udelal, stalo mne to hodne času abych to vytvoril nejvic sedelo ve ventilaci, natočeni budiku k jezdci a nevadilo ve vyhledu z okna.

Držak je upevnen oboustranou paskou a plastovou stahovačkou.
Ve ventilaci se udela dirka a kabel se pak vede pres dirku ve ventilaci za pristrojovoudeskou/budikama k pojistkovej skrini.

The model requires printing support
Number of walls 4
Layer height 0.16
Material PETG, ASA, ABS
NOT! PLA! NO! Low temepture resist
Tranlastion
Model vyžaduje podpory pri tisku
Počet sten 4
Vyška vrstvy 0,16
Material PETG,ASA,ABS
Nedoporočuji PLA.