Pill-ception: Pills inside pill-shaped compartments inside a pill-shaped case
You can use this design in two ways:
- first aid kit/travel pharmacy: Store everything you need for travels inside it
- Scale 100% (Print profiles are all with 70% scale!)
- weekly pill organizer
- Scale about 70% + comparments with weekdays
Please check out the images to get a feeling about the sizes
Assembly:
- push the pin through every compartment starting with the “end" compartment
- Important: Glue the pin to “comp_start_1” (the last compartment) only! Make sure that “comp_start_2” is NOT glued to the pin
Model names:
There are lots of models uploaded to the raw files:
- Case: There are 3 different versions to the top part of the case
- Case_top_with_lever
- Case_top_with_Holes
- Case_top_clean
- Compartment
- 3way: Compartment divided into 3 sections
- Clean: Just the clean model, no label
- Single: One letter as a label for the compartment
- Pattern: A letter pattered onto the surface of this compartment
- M, S, T, F: The letter that is used as a label
Print profiles
There are 4 print profiles:
- Clean design
- Single letter design
- Divided Single letter design
- Pattern design
All print profiles are scaled to 70%!
All print profiles use “Sunday - Saturday” order from top to buttom. Model files to get “Monday - Sunday” order are attached in raw model files
If you need any other letter on the compartments or a print profile with 100% scale please let me know. I will provide it for you!