This tea box has been created to be both a beautiful and practical gift. It can hold various types of tea and herbal infusions (you can even gift the box already filled with the favorite tea of your loved one), and it is printed in two parts. The box features Voronoi-style sides, allowing the contents to be visible from the sides while giving a unique appearance to the container. One side is slightly recessed to allow for the insertion of the multicolored image, which should be glued using cyanoacrylate adhesive (for example, this one).

In order to achieve the multicolor part, you need to have three different colors: black (or brown), white and red. You will need to manually change filament at specific stages of the 3D print or have a multicolor printer that does that for you. You can chose between two images that I prepared, the “Love” one, and the “Hearts” one.

Please notice that these colored prints need to be printed at 100% infill, with a layer height of 0.08mm, with a base layer of 0.16mm. Also, set the seam_position on closest.

Swap Instructions for the “Love” image:
Start with Brown or Black
At layer #9 (0.80mm) swap to Red
At layer #19 (1.60mm) swap to White.

-----------------------------------------------------------------------------

Swap Instructions for the “Hearts” image:
Start with Brown or Black
At layer #6 (0.56mm) swap to Red
At layer #16 (1.36mm) swap to White.