If you enjoy this print please buy me a coffee!

https://www.buymeacoffee.com/askninjatom

This spider lamp is great for working on items that need an over head light for. Also looks cool just as an upright lamp on the dresser.

Keep in mind you will need the BAMBULABS LED KIT 001 for this project.

https://us.store.bambulab.com/products/led-lamp-kit-001

(You can use the LED light facing up or down if you use the no diffuser option but the other diffusers might work depending on how you have the legs positioned)

or

This goes together just like the picture shows. (bolts not shown in cad drawing)

1. Place the Bambu LED Kit 001 into the base of the center part, screw on the diffuser of your choice. ***Do this first, otherwise after tightening up the legs you wont be able to get the diffuser on***
2. Bolt up the legs to the base using the printed bolts ( 9 bolts and 9 nuts are needed / 3 leg piece sections are needed to from one leg)
3. Screw one of the 3 diffusers choices ( No diffuser, Designer diffuser, Plain Diffuser
4. Route the cable down the back of the rear leg. You can also snake the cable through the leg pieces by taking off the bolts and running the cable through.
5. Optional Feet can be printed for more stability.
6. Plug in and enjoy!

Slow the speeds down when printing this diffuser as it tends to move the farther up you go.