Ergonomic slingshot with magazine v2 + Poch and Jig to Band Tie

This is the slightly improved version of Ergonomic slingshot with magazine (https://www.thingiverse.com/thing:4223071). The geometry of the handle has been changed slightly.

I also have a slingshot that is easier and faster to print. Slingshot / Zwille / Steinschleuder (https://www.thingiverse.com/thing:3950597)

There is also a new variant with rectangular fastening for the bands. A pouch and a tying jig have been added. ;-)

Slingshot with magazine:(Material: PLA / layer thickness of 0.20 mm)
- Slingshot v6-M handle. In order to have a better stability when printing the "Slingshot v6-M - Handle", I used Brim with 10 turns.
- Slingshot v6-M - cap. For a better fit with the handle and minimizing post-processing, I used a layer thickness of 0.12 mm.
- Slingshot v6-M-Flat - Handle. (this is the old version and hard to shoot than the "v6b-M-Flat" version)The only difference with this model, is the attachment of the bands. Here the attachment is rectangular. !!! Warning, not for beginners !!! Sorry, CAD meets practice. :-D

EDIT: 2020-03-26
- Slingshot v6b-M-Flat - Handle. (this is the new version, very pleasant to shoot. The error with the version "v6-M-Flat" was the inclination inwards.)The only difference with this model, is the attachment of the bands. Here the attachment is rectangular.

EDIT: 2020-05-17
- Slingshot_v9_-_Handle EDIT: 2020-05-17
I inserted grooves that improve grip in the hand. In addition, I have slightly enlarged the magazine and changed the lock, now it is closed with a bayonet lock.

P.S .: The size is optimized for a palm width of 9 cm = 90 mm. You can easily scale the model. Your palm width is 110 mm => 100 * (110/90) = 122.22, that means you have to scale the model by 122%.

Slingshot Pouch:(Material: TPU / layer thickness of 0.12 mm)
- Pouch - Universal v7. It is designed for balls from 8 to 12-13 mm. The ball centers itself in the middle of the pouch, as it should be. I have tested this pouch more than 1000 shots, so far everything is without noticeable signs of use. I also did some simple tensile tests. The pouch fails at around 30 kg, which is completely sufficient for me, I use bands with approx. 5-7 kg traction.

Band-Jig: what is still needed.

- 1x M6x65 mm, Partially Threaded, DIN 931 Hex Cap Screws
- 1x M6x65 mm, threaded rod, DIN 976-1
- 2x M6 hexagon nut, DIN 934
- 2x M6 Hexagonal nut, low profile, DIN 439
- 1x M6 Wing nut, DIN 314
- 2x M6 Washer, DIN 134

EDIT: 2020-05-17
Band-Jig Version 2
Is smaller and the geometry has been changed slightly to make it stiffer.

Home Monition - Dodecahedron:(Material: PLA)
I wanted to try out whether I could easily print out ammunition for at home, and that's the result. A regular dodecahedron and it works great, is easy to print out and acceptable for shooting.

I wish you much fun with it. And please be careful when shooting with the slingshot, sometimes things can break (vases, windows, mirrors and so on :-D)!