Watering Can
Watering Can
Boost
51
73
12
Print Profile(2)
0.28mm layer, 3 walls, 10% infill
3 h
1 plate
0.24mm layer, 2 walls, 10% infill
2.8 h
1 plate
Boost
51
73
12
3
111
63
Released
Description
Simple and stylish watering can for all your self watering planters. (or other regular flower pots)
Basic print settings:
- Infill : 10%
- Walls: 3
- Top/bottom shell layers: 3
- No support needed
Dimensions: H: 180 mm - can diameter: 70 - totel length: approx 218
Comment & Rating (12)
All
Print Profile
0.28mm layer, 3 walls, 10% infill
Printed with PolyTerra PLA
The default profile for PolyTerra except 10% aux fan.
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
underside of the sprout has troubles with overhangs. overall and amazing print and profile. does slowly leak if printed in a petg
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
This is perfect with PETG Clear and really cool tho, prints great while it doest need any supports on my bambulab A1 😍😍😍
WATERTIGHT TOO BTW 👌
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
Turned out great with no support. A few defects on the bottom of the spout but I can live with this.
0
Reply
Print Profile
0.24mm layer, 2 walls, 10% infill
Top
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
cool print
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
The designer has replied
0
Reply
Thank you for your rating!
0
Reply
Print Profile
0.24mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld