Model INFO:

Dimensions : 250mm x 179mm

You can scale the image, be sure to not change the Z height.

I've created a print profile so you have only to select your color in ams slot and you can hit print,

if you don't have ams or you don't have bambulab printer simply follow this instruction:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Grey
At layer #15 (1.28mm) swap to Marine Blue
At layer #18 (1.52mm) swap to White for the rest.