SEASIDE ESCAPE - TikTok BOARD GAME by abactor81

abactor81

Toys & Games>Board Games

Print Profile(9)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

4.7 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 15% infill

Designer

33 min

1 plate

5.0(1)

0.2mm layer, 2 walls, 15% infill

Designer

5.2 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 10% infill

Designer

5 h

1 plate

5.0(1)

Click to see more

Boost

Released

Description

Famous tiktok board game. The rules of the game are very simple, you can find the instructions by searching videos online.

ATTENTION: 32 pieces of the same subject are needed for each player, for example Emoji vs Animal etc.

And you need one “START” piece. Good fun!!!

If you liked my work, you can support me with a boost to help me create new projects.

Comment & Rating (21)

@EclecticCorinne

Print Profile

0.2mm layer, 2 walls, 10% infill

amazing design! thank you!!

The designer has replied

@abactor81

thank you very much :) . If you want, you can support my work with a boost to help me create new projects :)

@rachele819

trying to figure out they all four corners are curling up on every single tile. I printed the emojis and it happened and started the Jack o'lantern faces and same thing. the board printed without issue, plate is clean and it's not happening with any other design. any ideas?

The designer has replied

@abactor81

hi, it's strange... I printed them all without problems with P1S and texture plate. If you have this problem try selecting all the objects and adding the outer brim. Otherwise try increasing the palte temperature by 5 degrees.

@rachele819

Replying to @abactor81 :

ok, thank you. I will try adding a brim, I just hate removing them lol. I just tried printing again with the bed temp 5 degrees higher and it's happening again with each of the tile designs. strange.

@abactor81

Replying to @rachele819 :

mi spiace, con la p1s si stampano senza problemi e senza brim. Forse è diverso il PLA o non avendo la camera chiusa reagisce diversamente. If you have problems removing the brim, you can increase the "brim-object gap", try 0.15 to 0.20, and when the print is cooled it goes away almost by itself.

@user_2382154211

printing it now thanks so much are you planing on makeing diffrent sets later on

The designer has replied

@abactor81

Hi, Yes. Now I'm designing a case to contain the game, and later I'll make some other sets. Thanks for your feedback

@abactor81

hi, I've make and upload new different sets.

@user_2161177647

Great!

The designer has replied

@abactor81

Thank you

@user_2161177647

Good job!!!

The designer has replied

@abactor81

thanks

@Dmalab

Boosted

Good

@dom_met46

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@abactor81

thanks

@dom_met46

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@abactor81

thanks

@dom_met46

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

The designer has replied

@abactor81

thanks

@dom_met46

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(9)

Description

Comment & Rating (21)

License

Related Models

Rubberband Game

THE ISLAND TOKEN Whale / Ballena

TikTok The Gator

THE ISLAND TOKEN Sea Monster / Montruo marino