雷神之锤青春版。只有77mm高。用PLA打印，0.2mm层高，无支撑。可用3颗直径5mm，厚3mm的磁铁插入锤头的分件中，使得锤子的可以倾斜放置在金属平面上。

A tiny Thor's Hammer. Only 77mm in height. Printed in PLA, 0.2mm layer height without supports. Three magnets with a diameter of 5mm and height of 3mm can be inserted into one side of the hammer head so that the hammer can stand up diagonally on magnetic surfaces.

模型改自

This is a Remix model from

【原创雷神之锤青春版，带磁铁，3D打印无需支撑，这么可爱的小锤子，不考虑来一个么】 https://www.bilibili.com/video/BV1D841147Es/?share_source=copy_web&vd_source=fc7119f7f96477080a2b875d0778567f

原模型中，磁铁被暴露在外，修改后磁铁隐藏在模型中。感谢原作者“忙了一天的高师傅”。

In the original model, the magnets are exposed on the outside. This remix hides them to the inside. Thanks to the original author, 忙了一天的高师傅.