Wing Spoiler MX5 1/1

Wing Spoiler
for Mazda Mx5 Miata NB mk2,
dont know if it fits mk2.5 facelift, maybe!

Stl
* cap (wing base Left)
* cap (wing base Right)
* Center wing
* Start wing Left
* Start wing Right
* Wing Base Left
* Wing Base Right
* Center wing print it 5 times (put it together and it in the size you want)

you can print the center wing, or you can print the ''center wing print it 5 times'' and put them together you can cut it when you want, to do the size you want...
the parts wing you need to glue it together and after that you wrap them with fiberglass or carbon fiber for more strong...
Sand all the parts and paint them...

Very good quality!
design quality.
Looks awesome.

Νot tested in print, but made on a very good 3d scann model, like many others I have made successfully.
If you run into a problem and need corrections to the design I'm here.
Υou should print it in a flexible material so that it can fit with the car well, and for that it certainly doesn't need much support internally.
You should be very careful that the temperature differences do not exist and the design shrinks.
I don't have more experience with FDM printers to help you because I use SLA printer.

You will definitely need installation experience, be aware of these, sanding, screwing, plastering, painting.
The print product can also be used as a mold for polyester and carbon fiber.

If you have a scann 3d file you can ask me if i can make parts for your car, like diffuser, air vent hood, spoiler, wings, body kit, bumper, lip, sharks, vents gauge cases and others.
I would like to see your photos,
with the prints you made at the link below.
https://www.facebook.com/3R-Design-3D-101937252445960
If you like it click on like please. :)

You can "ΝΟΤ" resell or upload the stl and 3d design!!!"