Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.72mm) swap to Jade White for the rest.
In order for the bambu cloud slicer to accept the model, I had to reduce the detail size in hueforge. I am uploading the original detailed model from hueforge as and STL if you would prefer to use that. I do not believe the detail reduction I did should have a significant impact on image quality.
*Generated by AI*