Beautifull wall Moon lamp.
It is already cut in 4, i print it on my k1 max 3d printer due to big build plate with total diameter of 540mm, you need to have the 3d printer be in a good skew setup in order to match all 4 parts together nicely.
It has a channel where the wires can hide behind.
Printed at 20 %infill, 3 walls, i had also ironing on, i think it should work without also.
It needs support active on all 4 parts because in the middle of the moon is a cubic cut space for cables.
If printed in one piece it should work without supports.
It can be resized to match any printer. When resizing, i recommend to resize only x and y, not z, it is made for a max of 10mm width led strip.
If you want any small modifications contact me and i will do it for you for free.
Package contains 5 stls, and one 3mf file (4 stls with moon cut in 4, one stl in one piece)
In the photos i had a 24v led band, the light is a little too much, but with led bands with controls it will look awesome with a little less light.
I put it on the wall with double sided tape.
For any questions write me a message, thanks!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.