介绍：这是一个鲸鱼不倒翁，不需多色打印，不需支撑。

Introduction:It's a whale tumbler that doesn't need multi-color printing, no support.

打印说明：该模型分为四个零件，这两个零件需要使用80%的 直线填充，颜色为白色，层高0.1mm：

Printing instructions: The model is divided into four parts, these two parts need to be filled with 80% straight lines, the color is white, and the layer height is 0.1mm:

这两个零件需要使用15%的 网格填充，颜色为蓝色，层高0.1mm：

These two parts need to be filled with a 15% grid, blue in color, and 0.1mm in layer height：

打印注意事项：模型可能会翘边，打印前请清洁打印板，可以使用胶水增强平台粘性。

Printing precautions: The model may have warped edges. Before printing, please clean the printing board and use glue to enhance the platform's adhesion.

打印完毕后使用请胶水将零件粘连。

After printing, use adhesive to stick the parts together.