Horse Face Art Hueforge by RP47 Designs

RP47 Designs

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

Designer

3.4 h

1 plate

4.9(12)

NO AMS. Pauses for manual filament changes.

Designer

3.3 h

1 plate

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ IIID Max White Transmission Distance: 5.6

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Grey
At layer #22 (1.84mm) swap to White for the rest.

Comment & Rating (22)

@cjmick

First time printing a hueforge, didn't go quite as planned. Usually have no adhesion or leveling issues. I am using a A1 Mini with AMS. I had to scale the stl down to 80% and kept all settings the same. Default settings on everything else. Any suggestions?

(Edited)

The designer has replied

@RP47

Hello, sorry you had trouble. When resizing hueforges, you cannot scale them uniformly. The Z has to remain the same so the color changes happen at the correct places. Other than that I would make sure to wash your bed with warm water and soap and be very careful to keep from touching the surface and getting hand oils on it. Good luck!

@cjmick

Replying to @RP47 :

Thanks! Unfortunately its a no go, did the same thing but came up in the front instead of the sides.

@RP47

Replying to @cjmick :

Dang I am sorry to hear that. I have recently ordered an A1 mini and I am excited to get it. Once it’s here I will resize this print and see if I can print it. If I am able, I will post the profile and then we can try that. What build plate are you using?

@roberto.testala

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

great

(Edited)

The designer has replied

@RP47

Thank you for the rating.

@Stussi_82801

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

Love the image and for the most part it's a great set up. I did change when the color change to gray one layer earlier (layer 13) so the hair was all connected and added a lighter gray before the white so I had four color changes. I also increased the size to 245mm x 245mm

The designer has replied

@RP47

I appreciate the feedback.

@Martinezric20

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

First one I’ve ever done and I’m very impressed. Thank you!

@user_570132757

Boosted

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

Good quality If you want to print it with Bambu Studio, Remember that you have to switch color first or it will print white first. always Start from black

(Edited)

@rowiac

Boosted

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

Printed well. I should have used a lighter gray PLA though.

@user_3579886729

Looks quite cool!

@Brookecreations

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

The designer has replied

@RP47

Thank you for the rating!

@user_3579886729

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

@user_4002179470

Print Profile

AMS Filament Changes. 0.08mm layer, 1 walls, 100% infill.

Printed without any problems. P1S with AMS

The designer has replied

@RP47

Glad to hear it!

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (22)

License

Related Models

Dog Face 2 Art Hueforge

Ferret Face Art Hueforge

Precision 3D Joker Ledger art

Dog Face Art Hueforge